Operating Instructions of 6-in-1 Fast Baby Bottle Warmer|MW01

1. Preparations before operating

Disassemble, and clean all parts before you use the bottle warmerfor the first time and after every use. Do not wash the body unit.

2. Explanation of Settings

ON/OFF : Short press to turn on the appliance and the light is on. Long press to turn off and the light is off.

Function Selection : Press to choose functions, including food heating, defrosting, and steaming.

Room Temperature Bottle : Select this setting when you warm a bottle of room temperature milk (approximately 20-25°C/68-77°F).

Cold Temperature Bottle : Select this setting when you warm a refrigerated bottle of cold milk

(approximately 0-10°C/32-50°F).

Food Heating : Select this setting when you want to warm a container/jar of baby food.

Defrosting/ 24H Keep Warm : Defrost a bottle/bag/container of mill/baby food to a liquid state. It allows 24h keep warm function.

Steaming : Select this setting when you sterilize a bottle/container/pacifier.

3. Operating instructions

3.1 Standby Mode

Switch on the bottle warmer and you will hear a beep,then the povwer button turns green.Press the to enter into standby mode. In standby mode, select desired setting and press the power button to enter into working mode.

3.2 Room Temperature Bottle

1. Place the milk bottle in the bottle warmer, one at a time.
2. Add 40ml of drinking water and put the lid on.
3. In standby mode, press the to enter into working mode. Press and press andto select the desired setting based on the bottle material and milk volume. (The default volume is 5oz).
4. Press to start normal warming and the countdown timer will be displayed.
5. The bottle warmer beeps 3 times after ending the normal warming. Unplug the bottle warmer when not in use.

Note：

• Do not use the bottle warmer without adding water.
• Fill the bottle warmer with 40ml of water. Never let water level rise above the top of the bottle or spill over the edge of the warmer.
• Sprinkle a few drops of baby food onto your inner wrist to test the temperature.
• Do not warm milk for an extended period of time.

3.3 Cold Temperature Bottle

1. Place the milk bottle in the bottle warmer, one bottle at a tiime.
2. Add 40ml of drinking water and put the lid on.
3. In standby mode,press the to enter into working mode. Press and press andto select the desired setting based on the bottle material and milk volume. (The default volume is 5oz).
4. Press to start refrigerated bottle warming and the countdown timer will be displayed.
5. The bottle warmer beeps 3 times after ending the cold warming. Unplug the bottle warmer when not in use.

Note：

• Do not use the bottle warmer without adding water.
• Fill the bottle warmer with 40ml of water. Never let water leveI rise above the top of the bottle or spill over the edge of the warmer.
• Unplug the device when not in use.
• Sprinkle a few drops of milk onto your inner wrist to test the temperature.
• Do not warm milk for an extended period of time.
• Gently swirl the baby bottle before feeding a baby.

3.4 Defrosting/ 24H Keep Warm

1. Put a bottle/container/bag in the bottle warmer, one at a time.
2. Fill with drinking water to reach the level of the bottle/container. Make sure the water level does not exceed the top of the bottle warmer.
3. In standby mode,press the to enter into working mode. Press and select "THAW", then press andto select the desired setting based on the bottle material and milk volume.(The default setting is 5oz volume and plastic material)
4. Press the to start defrosting or 24h keep warm setting. the countdown timer will be displayed. (Tip: It's recommended to warm up milk for less than 3 horurs.)
5. The bottle warmer beeps 3 times and automatically switches to keep warm mode after ending the defrosting. The keep warm mode will keep 24 hours.

6. The bottle warmer beeps 3 times and switches off automatically after warming time.

Note：

• Do not use the bottle warmer without adding water.
• Fill the bottle warmer with water to just above the level of the milk in the bottle. Never let water level rise above the top of the bottle or spill over the edge of the warmer.
• Unplug the device when not in use.
• Sprinkle a few drops of milk onto your inner wrist to test the termperature.
• Do not warm baby food for an extended period of time.
• Gently swirl the baby bottle before feeding a baby.

3.5 Steaming

1. Clean the milk bottle before placing it in the bottle warmer.
2. Fill with 100ml of drinking water and put the lid on.
3. In standby mode, press theto enter into working mode. Press and select "STEAM".
4. Press to start steaming and the default countdown timer is 8 minutes.
5. The bottle warmer beeps 3 times and switches off automatically after ending the steaming.The machine will not enter into keep warm mode.

3.6 Food Heating

1. Place the food container in the bottle warmer, one at atime.
2. Fill with drinking water to reach the level of the baby food.If you have a large volume of baby food, make sure the water level does not exceed the top of the bottle warmer.
3. In standby mode, press the to enter into working mode. Press and choose "FOOD", then press andto select the desired setting based on the bottle material and milk volume.(The default volume is 4oz)
4. Press to start food heating and the countdown timer will be displayed.
5. The bottle warmer beeps 3 times after ending the food heating. The bottle warmer automatically switches to keep warm mode and continues for 24 hours.
6. The bottle warmer beeps 3 times and switches off automatically after warming time.

Note：

• Do not use the bottle warmer without adding water.
• Fill the bottle warmer with water to just above the level of the food in the container. Never let water level rise above the top of the bottle or spill over the edge of the warmer.
• Unplug the device when not in use.
• Sprinkle a few drops of milk onto your inner wrist to test the temperature
• Do not warm baby food for an extended period of time.