Inflation Guide：How to Properly Inflate the Stability Base|YG010

The stability base keeps the maternity ball in place, providing extra safety and support. Follow the steps to ensure optimal stability.

Step 1: Deflate the ring

To properly inflate the stability base, you should first remove any residual air inside the ring.

1. Fold the stability base as shown in the image.

2. Squeeze out as much air as possible.

   

Step 2: Prepare for inflation

To prevent air from seeping back in, begin inflating immediately after deflation.

1. Assemble the foot pump correctly.
2. Insert the nozzle into the air hole on the base.

3. Wrap the measuring tape around the base to monitor its size in real-time.

   

Step 3: Inflate to size

1. Press the foot pump all the way down, then allow it to fully rebound before the next stroke. Repeat this process. Do not exceed 30 pump strokes.
2. Use the measuring tape to check the circumference. The ideal circumference is 24 cm (maximum 25 cm).

3. Once reached, quickly remove the nozzle and insert the air plug.